1/2" Frosted-Through Clear Acrylic Sheet
Color 000FR · 1/2" thick
1/2" Frosted-Through Clear acrylic (plexiglass) with a matte (frosted) one-side finish, cut to your exact size from 11″ to 48″ per side. Choose a standard size or enter custom dimensions, add flame- or diamond-polished edges, and see the price instantly.
$5 for the first cut, $3 each additional, totaled across your line.
Need notches, holes, or curved cuts? Request a quote →
1/2" frosted-through clear in practice
At 1/2" the surface finish carries the look; the material itself is doing structural work.
Solid enough to machine, tap and edge-finish like a workpiece rather than a sheet — the range where acrylic is being used as a component, not a covering.
In a laser: CO2 machines cut acrylic cleanly at this thickness; never put polycarbonate or PVC in a laser.
The matte face hides fingerprints and cuts glare, and it will not polish back to gloss if scratched — keep the masking on until the piece is installed.
1/2" frosted-through clear (color 000FR) starts at $38.80 for a 12″ × 12″ piece at this thickness, and weighs about 3.12 lb per square foot, so a 24″ × 48″ piece comes to roughly 25 lb — worth knowing before you size a panel someone has to lift or ship.
Why 1/2" frosted-through clear acrylic?
A premium, solid sheet with real presence. At 1/2″, acrylic feels like a finished slab — ideal for tabletops, structural panels, weighted bases, and machine guards. The thicker edge also takes a polish beautifully, giving a clean, glass-like border.
About Frosted-Through Clear acrylic
Frosted-Through Clear is frosted all the way through the sheet, not just on the face. Our standard frosted (matte) clear is a clear sheet with the matte finish on one side; this one is made frosted as the sheet is formed — not coated, etched or sandblasted — so both faces read the same, there is no gloss side to orient or protect, and a cut edge comes out frosted to match. That is the reason to choose it: pieces where the cut edge shows (risers, dividers, laser-cut letters and shapes, nameplates, shelf and tabletop edges), parts seen or handled from both sides, and light boxes and diffuser panels where the frosted look should carry into the edge. It arrives paper-masked and laser cuts. Saw-cut and diamond-polished edges stay frosted; flame polishing turns the edge glossy, so leave it off if the edges should match the faces. If your design depends on a light-transmission figure, ask us before ordering.
Made to order. Everything listed here is available to order now. If your color or thickness runs out after you order and we can get more quickly, we make or source it and ship as soon as it's back in — we'll email you if there's a delay. If it's no longer available at all, we cancel that item and refund it in full. On a deadline? Email us before you order with the date and we'll tell you straight whether it looks tight.